Control indicator XK3101(N)
XK3101(N)
Application
It is electronic control weighing indicator for industrial application. It adapts for 24 bit A/D converter with high accuracy for signal and 16 bit A/D converter for analog signal output. It has RS232/RS485 series communication port. It equips with aluminum housing and is suitable for built-in control cabinet installation. It applies widely in industry, such as cement production, chemical, metallurgy for different weighing systems.
Key features:
- Optional data update rate: 6.25 times per second, 12.5 times per second, 25 times per second, 50 times per second (optional);
- Input mode point-to- point relay with dead contact;
- Separate digital communication port: RS232 and RS485;
- Three methods of marking and suitable for wide application;
- It has analog signal output: 4~20 mA, 0~20 mA, 0~5 V or 0~10 V (one of four variants is on web-site);
- Independent scoreboard port (current loop mode);
Technical data:
Accuracy class: | III класс, n = 3000 |
---|---|
A/D conversion mode: | Highly accurate A/D, Σ- Δ 24 bit |
Division: | 1, 2, 5, 10, 20, 50 (options) |
Input sensitivity: | about 1.5uV/e |
Deviation distribution coefficient | pi=0.5 |
Load cell excitation power: | DC 5V, 85 mA |
Load cell connection quantity: | Maximum 6 pieces 350Ω of analog load cell |
Input range: | -20mV~20mV |
Display mode: | 7-bit LED, symbol height 0.56 inch 20 segment basic display |
Serial communication portal: | RS- 232 or RS- 485, baud rate: 1200 bit per second ~19200 bit per second |
Communication protocol: | Channel module, constant transmission, XK3101 command mode |
Relay mode: | High and low limit; specified output value, closed |
Analog output: | current: 0Ма~20 mA; current: 4Ма~20 mA; voltage: 0V ~5 V; voltage: 0V ~10 V |
Dimension (height х width х length): | 87 х 172 х105 mm |
Mounting hole (height х width): | 76 х 150 mm |
Power supply: | AC 220 V; Frequency 50/60Hz, maximum energy consumption 6 W |