The currency exchange rate in Ukraine as of 25.04.2024:
EUR: 42.00
USD: 39.35
R36.10

Control indicator R36.10



Weighing control indicator R36.10 is referred to the special purpose devices. It is intended for application as a part of weight metering systems, testing and research equipment. Due to function of peak load determination the present device is widely applied in operation of tensile machines. Controller has advanced features, in particular, function of peak load determination.

Basic characteristics of R36.10:

  • Front panel made of stainless steel with dust-tight surface
  • keeping on display peak value of weight in sorting scales regime
  • 24 bit high-precision A/D converter, sampling rate 100 Hz
  • 4 output relay, 2 input relay
  • 2 interface RS232, support of micro-printer, additional scoreboard, support MODBUS RTU protocol
  • Auto printing function, auto save function
  • real-time clock
  • can store 4000 recordings
  • double line in accordance with “kg” and “n”
  • audio alarm function
  • possibility of device change without recalibration (by input of calibration factors)

Engineering data

Accuracy class: III class, n = 3000
A/D transformer: Highly accurate, low-temperature A/D, Σ- Δ 24 bits, Sampling rate 100 Hz
Resolving capacity: Full resolution: 20000d, minimum sensitivity 0.3 µ V/d
Operating conditions: 1. Peaking operation; 2. Instantaneous value operation.
Quantity of connecting load cells: At most 6 analogue load cells of 350Ω or equal to one load cell of 58Ω
Input signal range: -30mV~30mV
Resolving capacity: Full resolution: 20000d, minimum sensitivity 0.3 µ V/d
Input signal range: -20mV~20mV
Display: Upper display: 6 segment LED display, symbol height is 14 mm

Low display: 6 segment LED display, symbol height is 10 mm

Display update: 10 Hz

Communication serial port: 2 pcs — RS- 232
Communications protocol: Serial format, type-out, modbus-rtu, additional scoreboard format
Relay mode: 4 output relay. Peak load 1A

2 input relay

Dimension (height х width х length): 87 х 172 х102 mm
Mounting hole (height x width): 76 х 151 mm
Power supply: AC 220 V; Frequency 50/60Hz