Analog to digital converter KADL – 4
It is intended for signal conversion from analog load cells. Digital signal is encoded by close protocol KELI С,Е,К. The received signal from converter is transmitted through serial interface RS485 to digital indicator (D12, KU08 (D2008), D39).
Features:
- connectivity to 4 strain gauges.
- conversion of analog signal to digital from any load cell;
- signal filtering from high-frequency interferences;
- possibility of sensors operation with different load in one system;
- transmission of digital signal through RS485;
- full dust moisture protection IP66;
- 4-wire connection of load cells;
Specifications:
| Accuracy class | ІІІ |
|---|---|
| Digital module A/D code | 10 million |
| Conversion speed | 50 time/sec |
| Baud rate | 9600 baud |
| Temperature zero drift | < ±0.08uV/°C |
| Temperature deviation of sensitivity | < ±2PPM/°C |
| Maximum transmission distance | 1200 m |
| Interface | RS485 |
| Temperature range | from -40 to +60 С |
| Dimensions (LхWхH) | 300х220х70 cm |
